paste artex removal

With Artex, it is possible to conduct the test yourself if you are careful. Make sure you have covered the entire surface. Leave any mess on pourus surfaces until the lumps are dry and then pick them off. I tried removing a bit, but it looks like the ceiling may come down if I am to forceful. If wet plaster gets on your shoes, before you know it the house is covered. Wait for the Artex to soften. How do I remove old artex from walls?

Name: Faunos
Format: JPEG, PNG
License: For Personal Use Only
iPhone 5, 5S resolutions 640×1136
iPhone 6, 6S resolutions 750×1334
iPhone 7, 7 Plus, 8, 8 Plus resolutions 1080×1920
Android Mobiles HD resolutions 360×640, 540×960, 720×1280
Android Mobiles Full HD resolutions 1080×1920
Mobiles HD resolutions 480×800, 768×1280
Mobiles QHD, iPhone X resolutions 1440×2560
HD resolutions 1280×720, 1366×768, 1600×900, 1920×1080, 2560×1440, Original

This can be wiped again and will go. Then remove all obviously “high spots” of artex, where the stipples hang down. Score the paint lightly, however, since you only need to cut into the paint and not into the Artex beneath it.

As you scrape away the Artex, you can let it drop onto the drop cloth you spread out earlier. Protect yourself by wearing a dust mask and working gloves. If you have grave concerns you should Contact your local council for help with this. To allow us to do so you will be added to our email list, however you can unsubscribe at any time using the links at the bottom of any of our emails. We had a leak and some sections have just fallen off, revealing the plasterboard above.


Skim plaster is bought in bags of 25kg Smaller bags can be bought for patching and the mixing instructions are on the bag. Give the machine an adequate amount of time to heat up, too.

Press the steam plate over the corner of the Artex-covered area. Project Menu Project Menu. This completes the entire process.

How do you remove artex?

Thanks for letting us know. When removing painted Artex, use a long-handled blade scraper instead of a standard steel one. Yes, my password is: Eco Solutions What is Artex and Checking it for Asbestos Artex is a water—based covering, usually used to decorate ceilings, and generally brought to a textured finish with the use of a brush or comb. Pressing lightly some of the artex remained and could easily be sanded down when it dried out.

You can buy one of these test kits here. There are test kits that are available which come with all the necessary protective clothing to keep you safe while you take the sample which is then send to a lab for analysis. If you would like to purchase X-Tex then please check it out in our very own store: You can do this using a hand scraper or wall scraper and if you want to go the extra step you can also sand it down and get it as flat as possible as this will further aid in the final finish and also the ease in which it can be plastered over.


This can save you a lot of time and money in the long run. None of the methods recommended seemed suited to someone who wanted to avoid hard work so I did a few experiments of my own.

Cover the area as thoroughly and evenly as possible. Hire someone to test for asbestos. I tried removing a bit, but it looks like the ceiling may come down if I am to forceful. As with all of our projects, the money spent on practice is a tiny amount compared to the amount it takes to put a job right that has gone wrong. The project is over once you complete this step. Verify that all traces of Artex are gone.

Work slowly and carefully.

Removing Artex from a ceiling –

While we have the mess we intend to do the same in the adjacent room which was undamaged. Find a tradesman now! This is the point at which skim can be made smooth and the trowel marks will disappear. After removing the Artex, examine the surface more thoroughly. Don’t forget to wear a mask and the asbestos issue needs careful consideration. If the water canister has a fill line, make sure that you do not fill it above that line.